ADAM Audio Introduces Sub15 Subwoofer

View Single Page

Studio monitor specialists ADAM Audio have a new addition: a monstrous 15 inch subwoofer designed to take any system all the way down to 20Hz with clear and accurate low end response.

Take your reference system down a few notches -- in the best way possible, with the Sub15.

Take your reference system down a few notches — in the best way possible, with the Sub15.

Fit for mid-size to larger rooms, the Sub15 is powered by 1000W and provides exceptional dB range to accommodate each with a max output of 112dB. The sub is also fitted with many other features that keep the bass clean with minimal distortion.

The Sub15 from Adam Audio is $3750 MSRP and is available now.

Here is more from Adam Audio:

ADAM subwoofers

Our subwoofers are dedicated to ADAM Audio’s primary goal: the best possible authenticity in the reproduction of music. For our subwoofers, this means combining power and precision while simultaneously avoiding “impressive” bass volume at the cost of accuracy. Their task is it to complement the highly acclaimed lucidity and transparency of the ADAM monitors in the lower and lowest frequencies.

Sub15

The Sub15 is an extremely powerful subwoofer that is capable of extending the frequency range of main and midfield monitors down to 20Hz. The sturdy 15“ woofer is made of an exceptionally rigid aluminium membrane and is driven by two powerful magnets and a 100mm voice coil. With the power of 1000 Watts (RMS) the PWM amplifier has an efficiency factor of nearly 90%. With these performance features the Sub15 is very capable of handling critical musical passages with high and sudden bass peaks without showing signs of distortion or overheating. The downward firing bass port has been specially designed to cancel any kind of port noise by applying generous dimensioning and rounded edges.

In order to tweak the sound of the Sub15 to different room situations or individual taste we have implemented several controls as there is one for the volume (-60dB to +6dB) and one control for the crossover frequency (50 – 150Hz). The satellite speakers can be driven full range or high pass filtered at 85Hz by choice. In this way the Sub15 can be easily integrated in a Dolby surround setup. Furthermore unfavourable phase relationships between the satellites and the subwoofer particularly in the crossover frequency range can be dealt with the help of a phase reverse switch. The Sub15 also proves very flexible when it comes to connectivity: There are balanced (XLR) and also unbalanced (RCA) input / output connectors to be found on the rear of the subwoofer.

Comments are closed.